Post

Sea and Air: A Revolutionary Way to Produce Ammonia

Imagine: endless seawater and the air around us turning into precious ammonia — without giant plants, without fossil gas, without the massive energy consumption of the traditional Haber-Bosch process. All of this becomes possible thanks to…

Imagine: endless seawater and the air around us turning into precious ammonia — without giant plants, without fossil gas, without the massive energy consumption of the traditional Haber-Bosch process. All of this becomes possible thanks to thermally expanded graphite, microwaves, and plasma. This technology combines proven scientific principles into a single compact system that can operate even in remote areas or on offshore platforms.

Step 1: Hydrogen from seawater using thermally expanded graphite and microwaves

The reactor is loaded with thermally expanded graphite (expanded graphite) — a lightweight, porous material with excellent microwave properties. It heats up instantly and intensely under microwave exposure (to hundreds of degrees within seconds), acting as a powerful “microwave heater.”

Seawater is fed into the chamber under vacuum. The vacuum lowers the boiling point, facilitates gas removal, and minimizes side reactions. Under microwave radiation, the graphite drives steam reforming and water-gas shift reactions. As a result, water molecules are split and high-purity hydrogen (H₂) is released.

Scientific studies confirm the effectiveness: using activated carbon (similar in properties to thermally expanded graphite), hydrogen yield from synthetic seawater reaches 85-90%. Saltwater actually works better than pure water — impurities (organics and salts) accelerate the process. Energy consumption is noticeably lower than with conventional electrolysis, and there are no issues with chlorine evolution.

Hydrogen is drawn off from the first chamber into two streams.

Step 2: Producing pure nitrogen from air

Part of the hydrogen is directed into a second chamber, into which ordinary air is fed. Here, the hydrogen burns with the oxygen in the air:

2H₂ + O₂ → 2H₂O

The oxygen is fully bound into water, leaving nearly pure nitrogen (N₂) (with a small admixture of argon and other inert gases). This method is simple, reliable, and requires no expensive membranes or adsorbers. The resulting nitrogen is ready for the next stage.

Step 3: Ammonia synthesis in the plasma chamber

The remaining hydrogen is mixed with the nitrogen and fed into a third chamber, where microwave plasma (or another type of plasma discharge) is generated. In the plasma, N₂ and H₂ molecules are activated: atoms, radicals, and excited species are formed. This allows the reaction

N₂ + 3H₂ → 2NH₃

to proceed under far milder conditions — low temperatures and pressures — without the enormous pressure and temperature required by the classical Haber-Bosch process.

Microwave plasma is particularly effective for ammonia synthesis: it provides high energy density, a stable discharge, and good nitrogen activation. Laboratory experiments show significant NH₃ formation rates, especially when optimizing the gas ratio, power, and adding catalysts (such as those based on iron or ruthenium) in the plasma zone.

The vacuum applied in the earlier stages helps maintain gas purity and the stability of the entire process.

Advantages of the revolutionary scheme

Feedstock is virtually free and unlimited: seawater plus air.

Compact and modular: the unit can be relatively small, suited to decentralized production (on farms, ships, in remote regions).

Environmentally friendly: runs on electricity (microwaves can be powered by solar panels, wind, or surplus energy). No CO₂ emissions from fossil fuels.

Efficient: microwaves provide fast, volumetric heating and activation; the vacuum improves kinetics.

Versatile: the graphite can be reused or regenerated multiple times; the system is resistant to saltwater.

This technology combines in a single cycle:

Microwave water reforming (with proven yields of 85-90% H₂ from seawater)

Simple nitrogen production through combustion

Plasma ammonia synthesis (an actively developing field using microwave discharges)

The result is ammonia — a key product for fertilizers, future fuels, hydrogen storage, and the chemical industry.

Outlook

Of course, industrial scale-up requires optimizing the energy balance, improving graphite durability, cooling the reactors, and controlling impurities. But individual building blocks have already been proven in the laboratory, and connecting them into a single chain opens the way to a real revolution in “green” ammonia production.

Sea and air are not science fiction. This is a real foundation for the new energy and agriculture of the 21st century — a technology that makes ammonia accessible where it was once impossible.

If taken further — adding catalysts, optimizing microwave power, calculating the full energy balance — this scheme could become the basis for autonomous NH₃ production units right by the sea.

The world is changing. And this process is a vivid example of how simple but brilliant ideas turn the planet’s ordinary resources into the future.


Also published on: LinkedIn — Michael Vischmidt · Facebook — ARBOK Institute