Here’s another piece of good news. And once again, it comes from ARBOK. You no longer have to agonize over the choice — switching to electric cars or staying loyal to good old gasoline. Electric vehicles have long stopped winning on total cost of ownership, and when “Big Brother” is at the wheel of your car along with you — no thanks, count me out. Sometimes He locks the car doors during a fire or sees ghosts in a cemetery… Still, a car is a car, not a horror movie your real life depends on.
But ecology and savings are no joke. If there were a way to radically improve the internal combustion engines already on the road, the whole debate would simply disappear. The good news: such a way exists — not “someday,” but with a rollout horizon already in 2026. For several years, ARBOK engineers worked hard to solve a difficult task — making a standard ICE more fuel-efficient and less “dirty.” The giants of the Japanese, US, and European auto industries never achieved this, and the natural question was: can we? How do you make an ICE burn far less fuel while at the same time “washing out” the toxicity of the exhaust? We’re not here to argue about climate in general — we all breathe the same air. Whatever you believe about atmospheric CO₂ supposedly driving climate change that we feel every day — that’s not the point. The point, which we all understand anyway, is that there’s nothing good about car exhaust. Look at Delhi at night: the stars are hidden behind smog, and people wear masks not as a fashion statement. SteamShot changes this — without rebuilding the world or its factories.
Well, the news is that scientists have developed the SteamShot technology, which involves adding ordinary water to the gasoline entering the engine. In essence, the pistons are now driven by steam generated from water using the engine’s own high temperature (a cogeneration process), while the gasoline itself serves merely as a “starter” for the process — or, as ARBOK specialists call it, a “match.” No, we’re not simply “adding water.” We’re changing the working fluid of the cycle — that is, burning water in the ICE. In SteamShot technology, the main P·V work is performed by saturated or slightly superheated steam, while gasoline or diesel is only the “match” — the source of the starting heat for water’s phase change. The engine’s own heat and exhaust heat (cogeneration) are captured and returned to the cycle. The base architecture of a production ICE remains stock; a compact, innovative controlled steam-pulse circuit is simply added. Below is the essence and the advantages, stated as concretely as possible.
First and foremost — STEAMSHOT does not require any modification of a standard ICE. Of any make, from any manufacturer. New, or already installed in a used car that has covered, say, 150,000 miles or a million.
Applicable to production ICEs — without disassembling the base hardware:
• What stays: block, cylinder head, crank-and-piston assembly, intake/exhaust — all stock.
• What’s added: HPR-30 (HydroPulse Rail, 30 bar) — a compact high-pressure water rail/circuit; SPI injector (SteamShot Phase-Injector) — phased micro-injection of water/micro-fuel; TLR recuperator (ThermoLift Recuperator) — heat recovery from the head/exhaust; VMM (VaporMix Manifold) — a wet-path mixer; CNT (Condensate Neutralization Trap) — a trap and neutralizer for condensate.
• Technical targets: water pressure 28–32 bar; target peak in-cylinder pressure ~30 bar (production-level); steam-formation temperature window ~120–240°C. Nozzle geometry and timing are closed ARBOK IP.
5–6x fuel savings while fully preserving power
• Principle: steam becomes the main working fluid; the hydrocarbon only initiates water’s phase change and “warms up” the cycle.
• Effect: the dose of gasoline/diesel for the same operating conditions drops 5–6 times, while perceived pulling power and peak pressures stay within the production range.
• In practice: an immediate reduction in TCO for the driver, with no change of platform, tooling, or service ecosystem for OEMs.
Cleaner exhaust — not just because of less fuel
• CO₂: falls proportionally to fuel consumption (~5–6x).
• NOx: drops further thanks to steam dilution and a cooler flame front; exhaust temperature is lower by roughly 40–120°C compared to “dry” operation.
• “Wet chemistry”: saturated steam in the path binds part of the acidic precursors; weak carbonic/nitrogen acids form in the CNT, precipitate onto the coating, and then break down, releasing oxygen from peroxide traces. The result: a less aggressive urban plume without bulky aftertreatment.
Higher safety, because the “mass” fuel is simply water
• The main mass carrier is H₂O: non-flammable, readily available, requiring no special logistics.
• Ordinary tap or process water is acceptable (household-level TDS) with mesh pre-filtration at the injector; path materials are 316L/duplex plus ceramics at hot spots.
• For cold climates: standard antifreeze/heating solutions, as in cooling systems.
Water — convenience and independence
• Refueling wherever there’s a tap: quality is non-critical within reasonable limits.
• Part of the condensate returns to the loop; make-up water comes from a separate tank installed in the trunk or elsewhere.
• Diagnostics: level/conductivity sensors, “soft” anti-scale and self-cleaning algorithms — and even with contaminated water, all contaminants exit dry through the tailpipe.
This will save automakers from an expensive re-tooling for BEVs
• No need to build a new plant or new production lines. Only an additional “module per model” needs to be added, without rebuilding dies, chains, or service networks.
• The “here and now” effect: 5–6x less gasoline/diesel delivers a greater combined environmental and economic result than the questionable “greenness” of BEVs under the current grid mix and battery-disposal problems.
• For OEMs: high margin from customer savings, fast certification through existing procedures.
Scaling — from “small” to marine and stationary engines
• Compatibility: single-cylinder, inline, V-configuration, turbocharged, stationary, and marine ICEs.
• Control: unified electronics, a calibration map by BMEP/RPM; SPI is phased by pressure/knock with feedback from the steam pulse.
• Closed IP zone: precise SPI timing/geometry, the TLR temperature profile, hot-zone coatings, and the “anti-Leidenfrost” algorithm.
Regulation and urban air
• Measurements in g/kWh (US/EU): proportional CO₂ decline, NOx reduction from steam dilution, and lower toxicity and heat load on street-level air thanks to the wet exhaust.
• Certification path: no exotic aftertreatment systems needed — it’s already “clean” in the cylinder and exhaust.
Implementation roadmap (2026 horizon)
• Bench verification on a production ICE → SPI/controller calibration → road testing → pilot series in 2026.
• Pilot kit: HPR-30 + SPI + TLR + VMM + CNT + controller; retrofit on the assembly line or at a dealer during the pilot.
What Do We Have at the Finish Line?
SteamShot is a controlled steam pulse that makes water the main working fluid of the cycle, leaving the ICE unchanged while multiplying fuel savings 5–6 times and simultaneously cutting CO₂/NOx and increasing safety. Electric vehicles aren’t as environmentally clean as we’re usually told — battery disposal remains largely unresolved, as does the source of the electricity that charges your Chinese EV or your Tesla. A power plant releases plenty of CO₂, dust, and grime into the atmosphere — the only difference is that it happens a hundred miles from wherever your electric car is driving.
In terms of total pollution: with operational CO₂ emissions of ~27–32 g/km for STEAMSHOT (thanks to a 5–6x reduction in fuel) versus ~52 g/km for a typical Tesla on the average US grid, STEAMSHOT’s advantage is ≈38.5–48.1%; on gas-dominant generation (≈62 g/km) the advantage grows to ≈48.4–56.5%; on coal-based generation (≈150 g/km) — up to ≈78.7–82.0%. If you add the BEV’s battery “carbon tail” (roughly +21–32 g/km for a 60 kWh battery over a ~200,000 km lifespan), STEAMSHOT’s overall advantage becomes ≈56.2–67.9% for the average grid, ≈61.4–71.3% for gas, and ≈81.3–85.2% for coal. On NOx, STEAMSHOT is expected to gain a further edge from steam dilution and a cooler flame front (while for BEVs, the burden simply shifts to power plants), so in a real-world “average America,” STEAMSHOT confidently leads on both CO₂ and toxicity.
Hey, environmental advocates! Open your eyes! An ICE with STEAMSHOT is cleaner than any of your electric favorites, no matter the maker — whether it’s the reviled Chinese brands or your beloved Tesla or Mercedes.
STEAMSHOT is a fast, scalable, and economically sound way to bring a century of refined ICE engineering into the future — without a battery “anchor,” without rebuilding factories, without compromises for drivers, and without cutting hundreds of thousands of jobs. STEAMSHOT is the better ecology. STEAMSHOT is “Back to the Future 2.0”!
ARBOK isn’t offering to “promise a better atmosphere in 10 years” — it’s putting this into series production reality already in 2026.
Also published on: LinkedIn — Michael Vischmidt · Facebook — ARBOK Institute
