How do you find a basement, a tunnel or a cavity without opening up the floor or ground? Usually: drill, dig and hope. Sometimes: ground-penetrating radar, seismic surveys, satellite imaging of surface subsidence. But ARBOK can do it more simply: we scatter a special dust over the site, and the void gives itself away. The floor stays intact, the ground is not drilled: smart dust slips into the void by itself, and we only read the signal.
ARBOK uses TEGA as this very “smart dust”. Graphene dust is light and free-flowing – that is its main strength. It settles by itself where neither people nor machines can reach. Nobody has to enter the site. The particles are sprayed over the area or object. They fall into cracks in soil and concrete, voids under floor slabs, wall cavities, drainage channels and porous backfill. Where the dust settles, a mark stays behind.
The mark is read through two channels at once.
Radio-wave. Graphite conducts current well and has an enormous specific surface area, so at frequencies from hundreds of MHz to several GHz it increases radio-wave absorption and scattering. Repeated passes of a radar, scanning antenna or synthetic-aperture system reveal zones of anomalous absorption.
Thermal. The absorbed energy turns into heat. Heating continues during and after irradiation. The particles warm up more than the surrounding materials, and a thermal imager sees these zones. A few degrees of difference is enough for confident detection.
The dust finds its way where no probe can go. Repeated measurements beat single ones. Monitoring separates stable accumulations from random background and builds a map of hidden volumes, rooms and passages. The output is a stable radio and thermal contrast: it shows where the volume is, where the room is, where the path runs.
Why TEGA? Ordinary radar-absorbing materials and special markers are expensive, and a confident signal needs many particles. Low cost and tons-per-hour TEGA output let us cover large areas and reach deeper without losing profitability. The cheaper the dust, the more territory you can afford. Low price here is not a slogan but a condition of the method.
Where it works. Every task needs the same: enough particles per area, so price decides, not complexity:
- finding hidden rooms, basements, tunnels and cavities in buildings and underground structures;
- surveying soils and embankments for voids and caverns;
- monitoring structures: dust packs into developing defects;
- reconnaissance, where a hidden volume must be lit up without opening the object.
Smart dust over a large area is a working tool today. The classic idea of a contrast marker has finally become effective. Spray, irradiate, look with a thermal imager – the map is ready. Instead of expensive special materials, graphene dust harmless to Nature that finds the hidden by itself and makes it visible in the radio and thermal range.
