
Sulfur is up 80%, and Indonesian HPAL feels it first: a main source of nickel and cobalt sulfates for batteries.
How it works. HPAL is pressure leaching of ore with sulfuric acid. Sulfur, bought as an oil and gas by-product, is burned at the plant, the gas becomes sulfuric acid, and the acid treats nickel-cobalt ores: metals go into solution, and sulfates are produced from it.
It is a complex, hazardous, dirty process. After leaching, a lot of acid is left in the waste. It is quenched with limestone, releasing huge amounts of CO₂, and heaps of waste go to landfills. The acid is bought, used and destroyed, then new acid is bought and the loop repeats. Large sums are spent, though almost all the acid could be returned to the process. Neutralization is an outdated industry classic, not a law of physics. This option should be banned.
♻️ ARBOK offers an alternative. The technology regenerates spent sulfuric acid under vacuum at room temperature and returns it to the process. Water from the waste evaporates and returns to the loop too; metals and salts drop out as dry concentrates. No neutralizer, no membranes, electricity up to 1 kWh/m³. The plant stops paying for fresh acid, neutralizer, hauling and burial of the solution, lost acid, heaps of tailings and CO₂ emissions. Each tonne of acid returned to the cycle is a tonne of sulfur not bought.
ARBOK takes the needed metals from the same wastewater stream. For example, cobalt already dissolved in water: Co²⁺ concentrates, a second pass in the same stage brings it to commercial grade, nickel and copper come along. RO does not work here: an acidic, salty solution of mixed metals destroys membranes and ion exchange, while phase separation does not care.
Cobalt is key here. It has no mines of its own: it is a copper and nickel by-product. Mining is Congo; refining is China, where it goes for final purification. Congo’s 2026 volume is 96,600 t against world output of about 220,000 t. The metal has risen from $56/kg to $60/kg in 2026. But the same cobalt sits in wastewater, on top of world mining and outside Chinese refining.
Sulfur need not be bought either. The world makes about 80 Mt a year at $120–200/t. ARBOK-SULPHUR extracts sulfur and acid from refinery waste without SO₂ emissions: in the US this can cover 1.5–3 Mt a year, about a third of consumption.
Acid is easier to get from phosphate waste too. The old route from gypsum died in 1976: a furnace at 1,100–1,400 °C. The math is a dead end. ARBOK-SA removes the furnace: gypsum dissolves in an acid medium and is separated by vacuum at room temperature, 2–4 kWh/t. The operator is paid for disposing of the stacks, $280–300 M a year at a large site, and sulfuric acid comes out as a by-product. US stacks hold 1.5 Bt of phosphogypsum, up to 855 Mt of acid.
When sulfur gets 80% more expensive, the winner is the one who does not buy the acid twice.
