Household and professional fire blankets today are almost always made from dense fiberglass fabric. Such a sheet can cover a small fire source, cut off oxygen and extinguish the flame, but it remains a passive, single-function solution with limited heat resistance, fragility under repeated use and zero impact on smoke and toxic gases. Against this background, the task of extinguishing complex fire sources becomes especially acute – transformers, high-voltage equipment and electric vehicles with lithium-ion batteries, where traditional methods, including water and foam, are either low-effective or directly prohibited.
Arbok Tech offers a different approach: the use of industrially produced thermally expanded graphite Arbok (TEGA) in a multilayer textile material of a new generation. The TEGA-Blanket fire blanket developed on this basis is a soft flexible sheet that not only cuts off oxygen, but also redistributes heat flow, partially absorbs combustion products, shields thermal and electromagnetic radiation and can be used many times after regeneration. This text considers the material, design, performance characteristics and application areas of TEGA-Blanket — from household use to high-voltage substations, underground car parks and the electric-vehicle fleets of megacities.
Thermally expanded graphite Arbok as the base material
Thermally expanded graphite Arbok, industrially produced by Arbok, is a graphene-like multilayer material obtained by controlled chemical-thermal exfoliation of natural graphite. Each TEGA element contains 3–5 mln carbon layers one atom thick, which in the scientific community are called “graphene”, and for the discovery of which the Nobel Prize was awarded. Arbok’s specialists are able not only to controllably separate these layers from each other, but also to activate these single-atom carbon layers, turning natural graphite crystals into bulk TEGA with a maximally possible surface area and tunable porous structure. The technological task — to separate, activate and stabilise this multilayer structure — has been solved using a series of unique and original solutions with no analogues worldwide.
For firefighting tasks several key properties of TEGA are important. First, thermal resistance: the underlying graphite and glassy-carbon structures on which TEGA fabric is based are designed for temperatures up to 3800 °C in an inert environment; this is a huge safety margin for any realistic open-flame scenario, and the technology itself is already being considered for use in rocketry and hypersonic systems. Second, an extremely developed surface (up to several thousand m² per gram) and porosity, which allow the material to interact effectively with hot gases, smoke, aerosols and organic vapours. Third, low bulk density and processability: TEGA is easily introduced into fibres, yarns, fabrics, films and fillers, making it possible to create multilayer flexible systems.
Because Arbok does not purchase TEGA but produces it in-house, the cost of the material in serial production remains competitive and makes it possible to use it not only in space or military equipment, but also in mass consumer and industrial products. TEGA production is organised on compact units of Arbok’s own design and manufacture, with high throughput up to 1000 kg/h and energy consumption of about 1–3 kWh per kilogram. This is important in the context of fire safety, as it determines the availability of TEGA and the possibility of scaling TEGA-based solutions at the point of use, including TEGA-Blanket, both nationally and internationally.
TEGA-Blanket concept
TEGA-Blanket is a soft, flexible, flat sheet, with a basic household size of 40 × 40 inches (approximately 1 × 1 m). The sheet size is not limited by TEGA coverage capabilities and is selected for the task: from small household kits for kitchen and garage to large sheets designed for use at transformer substations, EV charging hubs, in hangars, underground car parks, depots and on board ships, as well as for covering large equipment including tanks and heavy trucks.
The material is manufactured according to the same principles as high-temperature glassy-carbon fabrics used in critical mechanical-engineering components and systems operating at ultra-high temperatures. Layers and elements of TEGA are integrated into the fire-resistant base — in the form of fibres, flocks, tubular structures and thin nano-films. The outer layers act as a screen absorbing direct flame and heat flow; the inner porous TEGA-based layers redistribute and partially absorb heat and also bind part of the combustion products.
Even in a “peaceful” household scenario this gives a clear effect: the blanket covers a pan with burning oil or a burning electrical appliance, cuts off the air supply within 3–5 seconds, the flame goes out, the user’s hands are protected, and the sheet itself remains operational.
In the home, conventional fiberglass-based blankets perform adequately when dealing with burning oil on a stove or a piece of burning clothing. The problem starts where the source of danger is not just open flame, but a large reserve of stored energy. This includes transformers, power cabinets, high-voltage switchgear, battery stations and electric vehicles.
According to international reviews, by the end of 2025 around 50 mln electric vehicles are in operation worldwide. In fire statistics they look “calmer” than classic cars: roughly 25 fires per 100,000 EVs per year versus 1,500–3,500 fires per 100,000 ICE vehicles. In other words, EVs catch fire tens of times less often in terms of frequency. But each EV fire is a different level altogether: higher temperature and longer burn time, more complex firefighting tactics, higher risk of cascading damage to nearby cars and structures in underground car parks and charging hubs.
The difference is clearly visible in water use. Fire brigades typically extinguish an ICE car with about 1–2 tonnes of water. A single electric vehicle can require up to 30 tonnes, and in severe cases of battery thermal runaway — up to 80–90 tonnes of water, which must then also be disposed of as contaminated wastewater. With a typical fire engine tank volume of about 1.5 tonnes, this means dozens of trips to a hydrant or a whole convoy of trucks for just one car. It is no coincidence that in some countries official guidance already allows a “let it burn under control” scenario for EVs if there is no risk of spread: classical methods are up against resource and tactical limits.
On top of this comes the damage factor. A major fire in a multi-storey car park involving several hundred vehicles is not only burnt-out cars but also partial structural failure, damaged engineering systems, shutdown of a shopping centre, airport or business complex, evacuation of people and higher insurance premiums. Direct damage and mitigation costs for such incidents fall in the range of 50–200 thousand dollars per episode, depending on country, city and the equipment involved.
With EVs the situation is worse. When an EV catches fire in an underground car park or a multi-storey garage, the “unit of account” changes. Extinguishing a single EV can require up to 80–90 tonnes of water, which must then be disposed of as contaminated effluent. With a typical fire engine tank of about 1.5 tonnes this is up to 60 runs to a hydrant or a whole convoy of vehicles just for one car.
At the same time the infrastructure fails: cable routes, ventilation and smoke-extraction systems burn, floor slabs deform, and the car park is closed for months. Case analyses of major multi-storey car park fires show that the total bill (burned cars, structural repairs, engineering systems, downtime of the business centre or mall, relocation or redistribution of tenants, higher insurance rates) easily reaches 10–30 mln dollars per incident, even if the initial source was just one vehicle.
Against this background, it is logical to view TEGA-Blanket as a tool specifically for high-risk zones. Its tasks are: local isolation and shielding of the fire source (EV battery pack, transformer, power cabinet, charging post); reducing thermal and smoke impact on adjacent vehicles and structures; keeping the scenario within controllable boundaries while firefighters decide whether to use water in industrial quantities or to let the system safely run out its thermal runaway under control.
Household and professional use
Classical household scenarios do not disappear. In apartments and houses TEGA-Blanket can cover a pan with burning oil, an oven, burning textiles, and localise a small fire in an appliance or a section of wiring. In a garage it can cover a battery, engine bay, charging station or e-scooter. On a yacht or boat the blanket can be used both as an extinguishing tool and as a temporary thermal shield during evacuation.
Rolled up, the sheet can be stored for decades under a bed, in a storage room, car trunk, service room, workshop, server room or warehouse. It contains no pressurised cylinders, requires no annual checks, refills or replacement. With proper storage its service life is practically unlimited.
Unlike powder and foam extinguishers, TEGA-Blanket leaves no chemical residue or contamination. Powder penetrates ventilation and equipment, causing corrosion and respiratory issues; foam floods furniture, electronics and food and requires lengthy cleanup. TEGA-Blanket works by physically cutting off air and through the behaviour of its multilayer TEGA structure, so after a firefighting episode it is enough to cool it, clean it and, if necessary, regenerate it by heating.
Security forces and rescue services
For military and special units TEGA-Blanket can be used as a rapidly deployable thermal and fire shield for vehicles and ammunition, a means of localising fires in engine compartments and troop compartments, and as part of the individual protection kit for armoured-vehicle crews and communications teams. Additionally, due to TEGA’s structure, such sheets can serve as a stealth-protection element: reducing radar and infrared signatures of equipment while combining fire protection and camouflage.
For special services TEGA-Blanket is a tool for quickly covering fire sources during operations in confined spaces, in arson situations and when working with explosive devices.
For emergency services and fire brigades, TEGA-Blanket is an emergency thermal shield for entry into the fire area, a means of localising secondary fires without using extinguishers and foam, a cover for evacuating casualties through zones of high temperature and smoke, and an additional element when working with burning flammable liquids, fuels and lubricants and battery modules, including in conditions of limited water supply.
Conclusion
TEGA-Blanket demonstrates how graphene-like materials are moving from fundamental science into practical fire safety. The thermal and chemical resistance of TEGA, its structural flexibility and production cost efficiency make it possible to create fire blankets that simultaneously cut off oxygen, protect against heat flux, partially clean the breathing zone from smoke and are ready for multiple use without complex maintenance.
At the household level this is a more reliable and cleaner alternative to conventional fiberglass blankets. At the professional level it is a tool that works where water and foam are either ineffective or practically unacceptable: in fires involving transformers, battery stations, electric vehicles and high-energy systems in dense urban environments.
Taken together, TEGA-Blanket should be seen not as yet another modification of a familiar product, but as a new word in firefighting. It is an example of how 21st-century materials change not only efficiency, but the very architecture of safety solutions — especially where old technologies are almost powerless and the cost of error for cities and infrastructure is measured not in cars, but in tens of mln.
Also published on: LinkedIn — Michael Vischmidt · Facebook — ARBOK Institute
