Post

His Majesty GRAPHENE!

The word “graphene” today is thrown around as loosely as “nano” once was. It’s slapped on hood-polishing powders, pastes, coatings, rubbers, concrete additives, and even plain graphite. It’s convenient for marketing. It sells. It sounds technological…

The word “graphene” today is thrown around as loosely as “nano” once was. It’s slapped on hood-polishing powders, pastes, coatings, rubbers, concrete additives, and even plain graphite. It’s convenient for marketing. It sells. It sounds technological — but it’s all a lie. It has nothing to do with the physics of the material or with real graphene.

The market is flooded with other surrogates too: graphene oxide, reduced oxide, “nanoplatelets.” Online stores sell “graphene powder” for the price of a dozen eggs, and on Chinese and Indian industrial marketplaces you can find “barrels of graphene” for $40-60.

This is not graphene.

And if the market reaches a turnover of $50 bln by 2030, we understand this is already a business, and the question is no longer scientific — it’s a question of control, quality, and scale. Because you cannot build a real business on a lie.

What graphene actually is.

Graphene is a layer of carbon one atom thick. A hexagonal 2D lattice — the image everyone pictures at the word “graphene.” And that picture is accurate. The 2D lattice has sp² bonds, an interatomic distance of 1.415 Å, an in-plane bond energy of 167 kJ/mol, and an interlayer energy in graphite of 16 kJ/mol — in the plane, a covalent, ultra-strong network; between layers, a weak interaction.

All of this is said purely to settle the definitions once and for all, and to answer the frauds: this is what His Majesty GRAPHENE, the material of humanity’s future, actually is — not the junk they market under that name.

Ideal graphene consists exclusively of six-membered rings. Theoretical carrier mobility is ~10⁵ cm²/V·s. The maximum measured value is 200,000 cm²/V·s. Thermal conductivity is 5,300 W/m·K — 2.5 times higher than diamond. Young’s modulus is ~1 TPa. Light absorption is ~2.3%. Graphene reaches the “theoretical strength of a defect-free solid” — a record value. A single-layer graphene oxide flake has a Young’s modulus of ~207.6 GPa. A single-layer graphene flake absorbs no more than 2.3% of incident light (essentially transparent).

A material one atom thick is stronger than steel, conducts heat better than copper, and is nearly transparent. From a materials-science standpoint, single-layer graphene is not a “material” but a substance — a single molecule (polymer) with a mass of about 1 picogram. A freely suspended graphene sheet at room temperature is not perfectly flat — it has “ripples” with a roughness of no more than 0.02 nm.

That is what GRAPHENE actually is! Not the stuff sold in barrels and tubes on TEMU. And yes, in October 2010 the Nobel Prize in Physics was awarded for the creation of graphene and the study of its properties.

Why is there so much talk about this?

It’s clear to everyone that producing a layer of graphene at scale is impossible — except for laboratory or scientific research, where there is no point in it beyond that.

There are various methods for producing graphene-like materials made of different numbers of single-atom carbon layers, but all of them (with one exception) are exceptionally complex and expensive.

Ultrasonic dispersion of graphite in liquids, with a real single-layer graphene yield of 12% by mass in the mixture — about 1% of the starting graphite — at the price of an airplane. CVD deposition on metals (thermal decomposition of methane on heated metals — Ni, Cu, Pd, Pt, etc. — using plasma at temperatures up to 1,000 °C), producing single- or bilayer graphene films on copper up to 1 cm² in size. Graphitization of SiC surfaces via thermal desorption of silicon from silicon carbide, producing graphene films up to 5 cm in diameter — expensive and highly specialized.

Unzipping carbon nanotubes — chemical treatment with acids and KMnO₄, combined with pulsed discharge — a very complex and expensive process. Reduction of graphene oxide, following the scheme “oxidize graphite → disperse → reduce,” using reducing agents such as hydrazine, NaBH₄, and dimethylhydrazine plus heat treatment. This technology is not viable, since it leads to major defects in the material.

Real laboratory multilayer graphene, in a quantity that would fit in a teaspoon, costs around $15 per gram. That is why “graphene in a barrel for $60” is either outright fraud, multilayer graphite passed off as its well-known relative “graphene,” graphene oxide, or plain ground carbon powder. And this needs to be said plainly.

The problem is not that multilayer graphene-like material — as the only realistic option for industrial use — is bad. The problem is that it’s called something it is not. The ideal, “real graphene,” is a single layer (1L) — an object of fundamental science, while industry works exclusively with graphene-like structures. That is exactly why any name containing the word “graphene” is a convention.

ARBOK and TEGA technology

Now to industry. At ARBOK we work with a graphene-like material called thermally expanded graphite (TEGA), because it delivers all the advantages of graphene not in the lab, but in practice. In essence, TEGA is real graphene, but:

Picture a book. Each page is a layer of graphene. The book has 3-5 bln pages. In ordinary graphite, all the pages are pressed together immovably. In TEGA they are pried apart and separated from each other, and each atomic layer functions as an independent object. All the “pages” — in fact, the single-atom graphene layers — are joined by the book’s “spine.”

At ARBOK we can produce TEGA at industrial scale — not 100 grams a day, but 1,000 kg per hour and more. The price is cheaper than drugs — depending on conditions, just $50 per kg — which makes ARBOK’s TEGA accessible for widespread industrial use. In any industry, for any purpose.

But it’s not just about quantity and price, which no one else in the world can come close to matching. We control the process of breaking the “spine” that holds the single-atom graphene layers together. This way we obtain billions of thin plates separated from one another. We know how to control the number of layers. We control the defect level. We control the surface.

ARBOK-TEGA equipment consists of compact, small modules ranging in size from a suitcase to a box the size of 2-3 refrigerators. The units run on independent fuel sources (gas, diesel, electricity), so they can be placed anywhere. Production next to the consumer. This fundamentally changes the economics.

Why TEGA is an industrial breakthrough

ARBOK-TEGA solves 3 problems:

Scale.

Cost.

Structural controllability.

We do not promise the impossible in the form of 1L. We promise a reproducible material with defined parameters.

Raman.

D/G ratio.

XPS.

Thickness control.

If this is missing, it isn’t a technology.

Where this works

Water and air

Sorption structures for petroleum products. PFAS removal. New solutions for cleaning contaminated water. A new generation of filters (for water and air) and filter media, specialized membranes; a new generation of catalysts; the creation of universal, high-efficiency sorbents, including for containing and cleaning up oil and petroleum-product spills.

Graphene structure = high specific surface area + chemical activity.

Concrete

Nanoreinforcement. Reduced microcracking. Giving the product frost resistance, plasticity, and resistance to bending and stretching. Cement savings of more than 50%. With graphene nanoreinforcement, ARBOK achieves concrete hardness (though at this point it’s no longer really “concrete,” but a new material) of up to 1,500 kg/cm². By comparison, today’s standards are 200, 400, and at most 600 kg/cm², while granite’s hardness is 900. At the same time, the product’s price drops by 40-50% with significantly improved properties. This is not just numbers. It’s cleaner production, reduced CO₂ emissions, and serious money.

Composites

Manufacturing of high-strength composites based on rubber, sealants, plastics, glass, concrete, and low-melting alloys; nanoreinforcement of structural materials.

Use of nanoreinforcing graphene-like structures in concrete, plastics, and epoxy and silicone resins, leading to improved core performance characteristics of concrete, fiberglass, and carbon-fiber composites.

Increased fatigue resistance of materials. Thermal conductivity and heat resistance up to 4,000 °C. Applications in aviation. Rocket systems. Infrastructure. Graphene has record-setting carrier mobility, thermal conductivity, mechanical strength, and the largest surface contact area in the world. Creation of a new class of high-strength materials based on amorphous-like carbon composite, glass-graphite type.

Industry

Creation of new types of seals and gaskets for turbines, engines, modern thermal and nuclear power generation, and the chemical industry; a wide range of seal and gasket types for turbines, engines, modern thermal and nuclear power generation, and the chemical industry.

Chemistry

π-π interaction with porphyrins and other aromatic compounds.

Radical reactions — addition of carbenes, nitrenes, aryl radicals.

Hydrogenation → formation of graphane (an insulator, the process reversible at 450-800 °C).

Fluorination (CF₄ in plasma, XeF₂) → formation of covalent products.

Modification of functional groups (-OH, -COOH) — esterification, silanization.

EMI and defense

“Stealth” technology — absorption of ultra-high-frequency electromagnetic radiation (EMI), information protection, bio-ecological protection from EMI.

High absorption capacity for EMI is applied across a wide frequency range: from 30-50 kHz to 600-800 GHz. Samples of graphene-filled structural and protective materials have been produced and tested: polymers, nonwovens, fabrics, paints. Reduced radar visibility. Lightweight protective materials. New types of gas masks.

ARBOK-TEGA is a rare combination of conductivity and strength.

Energy

Creation of ultra-high-capacity supercapacitors, battery electrodes; electrode materials; thermal interfaces; new types of solar panels operating 24 hours a day with a projected efficiency of 80%; creation of fully carbon-based electronics without traditional semiconductors and metals.

Military applications.

New types of thermobaric volume-detonating explosives, high-power volume-detonating explosives.

Medicine. Blood purification systems, filter materials, replacement of activated carbon with TEGA-based tablets that are 30-80 times more effective.

The bottom line

Graphene-based, graphene-like materials are not a brand. They are an atomic lattice.

Properties and applications depend on the number of layers. At N=3, mobility drops by an order of magnitude. Reactivity decreases. Stability increases.

With a tool for controlling and managing the final product, you’re playing God — and with TEGA you can essentially do anything. Take on any task. Because structure decides everything.

And finally

The TEGA market by 2030 — $50 bln. The question is no longer whether graphene will become important. The question isn’t even who will be able to produce it at industrial scale while honestly describing its structure and properties — ARBOK already can. What matters now is reorienting from producing grams for scientific experiments to producing tons per hour — and that is already an industry.

At ARBOK, we work with industry.

His Majesty GRAPHENE

The word “graphene” today is used as loosely as “nano” once was. It’s slapped on anything — hood-polishing powders, pastes, coatings, rubbers, concrete additives, even plain graphite. It creates a sense of something serious. But it’s only a “sense.” It has nothing to do with real graphene. The market is flooded with surrogates: graphene oxide, reduced oxide, “nanoplatelets,” and plenty of others. On Asian marketplaces, a jar of “graphene powder” costs about the price of a dozen eggs. In the industrial segment — $40-60 per barrel! This is, of course, not graphene. It’s petty fraud.

What is real graphene?

Graphene is a layer of carbon one atom thick. One atom. A hexagonal two-dimensional lattice. sp² bonds. Interatomic distance of 1.415 Å. C-C in-plane bond energy of 167 kJ/mol. Interlayer energy in graphite of 16 kJ/mol — more than a 10-fold difference. In-plane, a covalent, ultra-strong network; between layers, a weak interaction. That’s exactly why graphite can be exfoliated into layers while diamond cannot. Diamond is also carbon, but sp³ — its lattice is three-dimensional and rigid. Diamond’s thermal conductivity is about 2,000 W/m·K. Graphene’s is about 5,300 W/m·K — 2.5 times higher. Copper is about 400. Silicon is about 145. A material one atom thick conducts heat better than diamond and more than 10 times better than copper. Young’s modulus is about 1 TPa. Theoretical carrier mobility is ~10⁵ cm²/V·s. The maximum measured value is 200,000 cm²/V·s. Light absorption is about 2.3% per layer. An almost transparent plane that conducts electricity and heat like no conventional material.

Applications of graphene.

From a materials-science standpoint, single-layer graphene is not a conventional “material” but a substance: an enormous molecule with a mass of about 1 picogram. If you take a sheet of paper 100 microns thick, roughly 300,000 layers of graphene would fit within that thickness. A free-standing graphene sheet at room temperature is not perfectly flat — it has ripples of about 0.02 nm. Even an atomic plane is “alive.” The Nobel Prize in Physics was awarded in 2010 for the creation and study of graphene.

Graphene is practically transparent and absorbs 2/3 of light. Graphene’s electrons have a high flow velocity, reaching 1/300 of the speed of light. Despite its extremely thin structure, graphene is 300 times stronger than steel.

Now to production.

Ideal single-layer graphene cannot be produced by the ton. That is laboratory territory. And it is produced by various methods: Liquid exfoliation — ultrasound in solvents such as N-methylpyrrolidone, dimethylacetamide, γ-butyrolactone. The real yield of single-layer material is about 1% of the starting graphite. In the mixture — up to 12%. With repeated processing — 7-12%. The rest are multilayer fractions. CVD deposition — decomposition of methane on heated Ni, Cu, Pd, Pt at temperatures up to 1,000 °C, producing single- or bilayer films up to 1 cm² in size. Graphitization of SiC surfaces — thermal desorption of silicon, producing films up to 5 cm. Unzipping carbon nanotubes — chemical or pulsed. Reduction of graphite oxide — hydrazine, NaBH₄, dimethylhydrazine, heat treatment. Full reduction to “ideal” graphene is not achieved — defects remain.

And yes, graphene is produced today. In laboratories. On equipment costing millions of dollars, and at huge plants. But output volumes are in grams. The price is about $15 per gram, and about 100 grams a month are produced. This is output for scientific purposes. That’s why “graphene in a barrel for $60” is not graphene with a thermal conductivity of 5,300 W/m·K and mobility of 200,000 cm²/V·s. It’s anything but graphene.

Industry works with graphene-like structures. At ARBOK we work with thermally expanded graphite (TEGA), produced using our own proprietary technology, because it delivers graphene’s advantages not in the lab, but in the real sector. In ordinary graphite, the layers are pressed together. In TEGA, the interlayer distance is increased and the structure is opened up. It is no longer a dense stack of atomic sheets, but a three-dimensional system in which the layers are partially separated. Picture a book with billions of pages. In ordinary graphite or diamond, the “pages” are glued together. In TEGA, they are pried apart. Controlling the process means controlling the breakdown of the “spine” without destroying the pages — and that is exactly what we have mastered.

The output of a mobile unit is up to 1,000 kg per hour. Not grams. A flow. The cost is about $50 per kg — 3,000 times lower than laboratory equivalents. The difference between $15 per gram and $50 per kilogram is the difference between a publication and a factory. The equipment is compact. Modules run on gas, diesel, or electricity. Production can be located right next to the consumer. This changes the entire underlying logic and scope of application.

TEGA’s structure is turbostratic. The layers are misoriented, the edges are active, and the specific surface area is high. Monitoring is mandatory: Raman spectroscopy — G and 2D peaks; the D/G ratio as a defect indicator; XPS for surface chemical-state analysis; thickness distribution. Without this, it doesn’t work.

The chemistry of graphene is its surface. A huge π-system. π-π interactions with aromatic compounds. Radical reactions. Hydrogenation forming graphane at 450-800 °C — turning a conductor into an insulator. Fluorination (CF₄, XeF₂) — covalent derivatives. Modification of functional groups — OH, -COOH, silanization, “grafting” onto a polymer matrix. This is control of the surface, and therefore control of the material’s behavior.

Applications of graphene.

Applications are determined by structure. In water — sorption materials for petroleum products with the highest natural capacity: 1 gram of TEGA holds 80-120 (up to 160) grams of petroleum products. This also applies to PFAS remediation. High specific surface area plus active edges deliver efficiency above conventional sorbents. In concrete — a change in microstructure through graphene nanoreinforcement of cement stone. Density increases. Pores shrink. Microcracks are suppressed. Strength reaches up to 1,500 kg/cm² versus the standard 200-600. Granite is about 900. Concrete starts behaving better than natural stone, while requiring more than 50% less cement. TEGA structures are leading materials in this field. TEGA-Beton technology makes it possible to nanoreinforce concrete with graphene in critically minimal quantities (0.05-0.5% by weight of cement), which leads to a significant increase in compressive strength (by 30-50 and up to 150%), flexural strength (by 30-120%), reduction in crystal size, and improved water resistance.

In composites — reinforcement of rubbers, sealants, plastics, glass, concrete, and alloys. Increased fatigue resistance. Heat resistance up to 4,000 °C — the domain of carbon-ceramic systems, where metal flows but the structure remains intact. In energy — electrodes, supercapacitors, thermal interfaces. In EMI protection — absorption of radiation from 30-50 kHz to 600-800 GHz, graphene-filled polymers and coatings, reduced radar visibility. In medicine — sorption materials and tablets with 30-80 times the effectiveness of activated carbon.

Properties depend on the number of layers. A single layer gives maximum mobility and minimum thickness. 2-3 layers bring a drop in mobility and a rise in stability. Dozens of layers already approach graphite, but with a different architecture of interlayer interaction. By controlling the number of layers, the defect level, and the spacing between them, you control the mechanics, heat, conductivity, and reactivity. Structure decides everything.

Graphene is the extreme limit of carbon architecture. Diamond is bulky and hard. Graphite is layered and soft. Graphene is a single-atom plane that combines strength, thermal conductivity, electrical conductivity, and minimal mass.

The conclusion is simple.

Graphene is not a word or a label on a package. But industry doesn’t live under a microscope. It lives in tons. And that’s exactly why graphene-like structures become the key to scaling. The question is not about the name. The question is about structure, capability, control, and economics.

If you can produce a material at 1,000 kg per hour and control its architecture, you stop looking for it on AliExpress.

A market worth tens of billions of dollars is only the beginning. Volumes will be far larger once humanity understands what TEGA really is — a material that can be produced without limits. And in this story, the winners will not be the ones who shout “graphene” the loudest, but those who understand that an atomic lattice does not forgive amateurs.


Also published on: LinkedIn — Michael Vischmidt · Facebook — ARBOK Institute