Post

TSM Ceramic (Fire) — Why It’s Time to Change the Approach to Passive Fire Protection in the U.S. 🛡️

📝 Introduction 🚒 The firefighters in America are amazing people. They work miracles. But that doesn’t replace the need to be careful with fire. 📊 In America, just by official statistics — 1.4 million fires per…

📝 Introduction

🚒 The firefighters in America are amazing people. They work miracles. But that doesn’t replace the need to be careful with fire.

📊 In America, just by official statistics — 1.4 million fires per year. Direct material damage — about $18 billion. Plus 3,400 dead and 13,000 injured. And those numbers are tallied in a way that hides half the figure: insurance costs, business downtime, displaced families. 🌲🔥 California with its wildfires stands apart — over the last two seasons alone, cities lost more than $80 billion. Insurers are leaving the state. Business owners are getting denials or premiums that used to be paid only by oil companies.

🛡️ It would seem the answer to all this already exists — fire-protective coatings. There’s plenty of fire-protection products on the market, and they work reasonably well. But that’s not enough. Do you know why I think so? Because the trend of growing fires isn’t slowing down. If everything were really working, the picture would look different. That’s why our team developed not just a fire- and heat-protective material in the form of a ceramic paint — TSM Ceramic ThermoGuard, which at 1 mm of application provides not only 15–20 minutes of fire protection, but also adds an extra thermal-insulation layer that works both for fire protection and for shifting the so-called “dew point” within the structure, and accordingly improves the energy efficiency of the assembly.

⚛️ The ceramic coating is built on hollow nanospheres developed specifically for it, and these are no longer something new in global industry. Earlier versions of similar material, well known to specialists, were called microspheres. There are many examples of nanosphere applications — from nanospheres containing carbon dioxide that instantly localize the seat of fire, to vacuum nanospheres for thermal and acoustic insulation. 🏭 Production is located in the EU and is already running; U.S. launch — 2026.

You already understand how it works.

📰 Article

⚠️ When fire protection itself becomes the problem

The U.S. passive fire-protection market has barely changed in 30 years. The same materials: paints on steel, gypsum board around columns and beams, sprayed mineral wool over floors, reinforced cementitious plasters. UL 263 and ASTM E119 certificates get reissued, but the logic stays the same — the thicker, the better. The fire situation isn’t improving: the industry thinks in millimeters and inches, not in new approaches.

🏘️ The main place where this hits the wallet is residential construction — not warehouses or data centers. The new IBC and IRC 2024 editions tightened fire-resistance requirements for wall assemblies in California’s WUI zones and on Florida’s coast. A one-hour fire-resistance limit between apartments is now mandatory in most new Type V buildings. Half of existing American homes are wood-frame with gypsum-board finish, and that finish has to be brought up to the new requirements on the fly.

❌ Three weaknesses of classical systems

First — Type X gypsum board. A 1-hour interior unit-separation wall requires two layers of 5/8″ (15.9 mm), totaling 32 mm (1¼”) on each side. That’s weight on a wood frame, joints, screw fastening every 200 mm, tape and joint compound at every seam. Gypsum board is brittle: any settlement, remodel, or leak — and the seam opens up; in fire-investigation reports, seam defects come first. Retrofitting one apartment of 970 ft² (90 m²) up to a real 1-hour rating — $18,000–28,000.

Second — fire-protective paints on steel and impregnations on wood. In Class III and IV multifamily buildings, steel is everywhere. To get steel to 1-hour, the paint thickness grows to 3–4 mm. A licensed painter in the U.S. costs $45–75/hour; on a typical 6-story residential building with an exposed frame, fireproofing the steel alone runs $40,000–90,000. Fire-retardant impregnations on wood require re-treatment every 5–7 years.

Third — the wood frame itself and polymer wall materials. A 2×4 stud is fuel load. Polymer wall panels in bathrooms and kitchens (PVC, composite, acrylic) burn fast with toxic smoke. Expanded polystyrene (EPS) in ETICS assemblies is the leading incident in FM Global reports over the last three years: fire spreads through the insulation inside the wall while nothing is yet visible from outside. Vinyl siding melts at +74 °C and ignites at +390 °C — from a single spark from a neighboring yard.

✨ This is where TSM Ceramic (Fire) comes in

It’s a different principle. Not mass and thickness, but a barrier of TSM Ceramic nanospheres — a proprietary patented formula of binder, reinforcing additives and nanospheres. The working layer is 1–2 mm (0.04–0.08 in), usually applied in two passes of 1 mm perpendicular to each other — forming a lattice structure that better holds physical and thermal loads. The obvious question: how can 1–2 mm of TSM compete with 3–4 mm of other mastics and impregnations or 15 mm of fire-rated gypsum board? A 2× difference in thickness means a different weight, different logistics, different installation time and downtime. And these are exactly the line items that make up 60% of the cost of work.

🌡️ Heat in a fire travels three ways: conduction, convection, and radiation. The toughest is radiation: it reaches the structure before the flame does. Classical systems work only against conduction — through mass and heat capacity. TSM Ceramic works against all three, and across all main residential structures. On wood — keeps the surface of the stud or rafter below the pyrolysis temperature (around +280 °C). On gypsum board — a TSM layer over Type X dampens radiation early: the crystallization water in the gypsum leaves more slowly, the board holds its rated value longer and doesn’t crack at the seams. On polymer panels and EPS — insulates them from external heat. On steel — reflects 90–93% of incoming infrared, and the frame holds its design load-bearing capacity longer.

⏱️ The main thing in passive fire protection is time — for evacuation and for the fire crew to arrive. TSM Ceramic gives a wood stud the same 60 minutes at a thickness 16× less than a double layer of gypsum board, and 30× less than a standard ETICS assembly with EPS.

📋 Material parameters

Impact strength 50 kg·cm. Linear elongation 65% — the coating stretches with the frame and doesn’t crack from house settlement or thermal expansion of steel. Warranty 10 years, service life — over 20 years. VOC 14 g/L vs. 500 g/L allowed in the EU and U.S. — for residential interiors and children’s rooms this matters.

🔗 Adhesion — the main trump card for residential construction

TSM Ceramic adheres to metal (1.53 MPa / 222 psi), concrete and wood (1.84 MPa / 267 psi), brick, gypsum board (right over standard Type X primer), polymer panels (PVC, acrylic, composite), OSB and plywood, plastic, rubber, and even cardboard. One material covers wood studs, gypsum board, plastic wiring conduits, attic rafters, and bathroom panels. One product, one crew, one set of equipment — and no demolition of finishes during retrofit: TSM goes on top.

🏗️ Where to apply TSM-Fire first

The first market is residential construction. Three reasons: tougher fire requirements in California’s WUI zones and in Florida after hurricanes; rising real-estate prices, so owners don’t want to lose homes through the chain from grass to eaves; and labor shortages — developers need a way to meet IBC requirements without three contractors and a month of downtime. Scope: unit-separation walls — retrofit to 1-hour without tearing out finishes; ceilings and inter-floor assemblies; wood rafters, trusses, and roof sheathing; eaves, overhangs, and roof spaces in WUI zones; walls and ceilings in bathrooms and kitchens with polymer panels; garage walls adjoining living spaces (IBC requires 1-hour); electrical cabinets and cable runs. The commercial front — warehouses, data centers, ships, refrigerated facilities — exists, but is secondary in roll-out volume.

🌺 Lahaina, Maui, August 2023

Fire moved from grass to wooden eaves, then to rafters, then to walls. Almost no residential building in the historic part of the city had fire protection on roofs and overhangs. Residential units — close to 2,200; damage — over $5 billion. Had the roofs and overhangs been treated with a thin-layer ceramic barrier, part of the buildings would have held the critical 15–30 minutes until the fire department arrived. Treating the roof and overhangs of a single 2,500 ft² (230 m²) home — $4,500–7,000, less than a single insurance deductible.

💰 Residential economics

A standard home in California or Florida, 2,500 ft² (230 m²), Type V wood frame. Classical retrofit to WUI requirements: double Type X on exterior walls, intumescent impregnation on rafters and sheathing, mineral wool in floor assemblies, ignition-resistant roof replacement — $30,000–50,000, with the family displaced 4–6 weeks. TSM Ceramic (Fire) on the same surfaces — $8,000–14,000, work 4–7 days. Direct savings — $18,000–40,000 per home, and the family returns 4× faster.

🏢 Multifamily example. A 200-unit apartment complex, retrofitting unit-separation walls to 1-hour. Classic — $600,000–900,000 and 6–10 months of phased downtime. TSM — $200,000–380,000 and 4–8 weeks. Savings — $300,000–600,000 per project.

📈 Scale

In California, about 4.5 million homes are in WUI zones. Across the country — over 20 million residential units in elevated fire-risk zones, plus 21 million apartments in multifamily buildings with the 1-hour-between-units requirement. Conservatively 5% of the pool — about 2 million properties; with average savings of $15,000–35,000 per property, that’s $30–70 billion in freed-up funds. Residential alone.

🏦 Insurance

A home or apartment with confirmed TSM fire protection lowers the fire-risk class. In the U.S. that yields a 10–25% reduction on the annual premium. The average premium on a home in a California WUI zone is $4,000–9,000/year; in high-risk ZIPs it reaches $14,000. Savings — $400–3,500/year per family; over the 10-year service life of the coating — $4,000–35,000 net per home. The retrofit pays for itself on insurance savings alone.

🌱 Carbon footprint

Gypsum board — quarries, kilning, freight cars. EPS foam — petrochemicals and polymerization. Mineral wool — glass and rock melted at +1500 °C. TSM Ceramic ships in a few containers per project, often in a single shipment. CO₂ emissions from fire-protection works fall several-fold. As a bonus — the home’s heat loss drops 20–30%: the same coating works as a thermal barrier.

🎯 Bottom line

With TSM Ceramic (Fire) the conversation moves beyond “which material to choose”: whether American families can stop losing homes in WUI fires, whether developers can meet IBC and IRC requirements without months of downtime, whether insurers can return reasonable rates to California and Florida, and whether municipalities can free up tens of billions of dollars on something the new codes already require.

The tool already exists. It’s as thin as a coat of paint and works like a shield. Only one question stands edgewise: does the country keep burying homes by season — or does it start protecting them with what is already poured into canisters.

The choice is up to owners, developers, and insurers. Pass this on to Sacramento, Tallahassee, and Austin.

Article length: ~1,600 words (intro + body).


Also published on: LinkedIn — Michael Vischmidt · Facebook — ARBOK Institute