Post

A Holiday Has Arrived for Cold-Storage Owners!

The cold-storage warehouse of the future begins with a simple and unpleasant number. A typical modern cold-storage facility in the USA or Europe has about 100,000 m³ of usable volume — roughly 3.5 million ft³. According…

The cold-storage warehouse of the future begins with a simple and unpleasant number. A typical modern cold-storage facility in the USA or Europe has about 100,000 m³ of usable volume — roughly 3.5 million ft³. According to industry statistics, such a facility consumes around 25 kWh/ft²/year solely for cooling. With a floor area of about 8,300 m², or roughly 90,000 ft², this results in approximately 2,250,000 kWh/year.

At an electricity rate of $0.12/kWh, such a warehouse in Texas or Georgia pays about $270,000/year for electricity. In Europe, at €0.30/kWh, this becomes €675,000/year spent solely on cooling.

The old physics of classical systems has long become a heavy burden, although everyone has grown used to this horror over decades. A “modern” cooling system is still a closed vapor-compression cycle with a compressor, condenser, expansion valve, and evaporator. In reality, this means evaporator batteries under the ceiling, kilometers of freon or ammonia pipes, a large compressor hall, and piles of auxiliary equipment. The real COP of such systems at low temperatures is around 1.5–2.5.

All heat gains through walls, roof, doors, joints, plus infiltration of warm humid air and internal heat from people and machinery, are paid for by pure mechanical compressor work. That’s why cold stores in warm regions honestly burn through 20+ kWh/m³/year. There is simply no other way for this model to function.

Arbok has developed and tested its own innovative and integrated cooling system — CRIOJET. At its core is a simultaneous use of vacuum coolers, tangential aerodynamics, phase-transition cooling, a new type of insulator, and several additional proprietary solutions.

In CRIOJET, cooling is generated not by endlessly pumping freon through a closed loop, but by the rapid evaporation of a refrigerant in a low-pressure zone with massive latent-heat extraction. The refrigerant is water or safe alcohols.

A compact CRIOJET module includes special vacuum coolers that chill 1,000 m³ of air — about 35,300 ft³ — from 50 °C (122 °F) down to 10 °C (50 °F) in 8–10 minutes. The temperature delta is ≈40 K, or ≈72 °F. Energy consumption for this entire process is only 2.5–3 kWh, or about 8,500–10,200 BTU. Converted, this is ≈400 m³/kWh, or ≈14,100 ft³/kWh, at that temperature difference.

The key feature of CRIOJET is its operating mode. A conventional system must work almost 24/7/365 to constantly offset heat gains. Compressors accumulate 4,000–5,000 hours/year.

CRIOJET works differently.
It turns on only when temperature exceeds the threshold. The rest of the time the system simply holds the achieved cold thanks to normal thermophysics, rapid cooldown capability, and a high-quality building envelope. As a result, the annual active operation of CRIOJET totals only 150–300 hours. That means the system actually works 10–12× less than classical refrigeration.

At the same time, CRIOJET is not only cooling — it is also ventilation. Cooled air is not recirculated through drying evaporators. Humidity stays natural. Efficiency does not drop in high humidity. Bacterial colonies do not grow on “wet” surfaces. Odors do not accumulate.

With continuous operation, CRIOJET provides multi-pass ventilation without drying the air.

For food-storage warehouses, this means:
⭐ fewer product losses,
⭐ no mold,
⭐ stable microclimate,
⭐ longer shelf life.

The TSM thermal barrier is part of the CRIOJET architecture. This is a ceramic coating with thermal conductivity of 0.001 W/m·°C. 1 mm of TSM equals about 3.5 cm of foam plastic. 3 mm equals about 10 cm by calculation.

But this is only theory.
In practice, TSM is a seamless film with no joints, no cracks, no thermal bridges, no fasteners, no moisture absorption. Therefore, real heat losses are 30–40% lower than those of conventional foam of the same calculated thickness.

In a real cold-storage facility, 3 mm of TSM performs like 14–18 cm of foam, and when applied inside and outside — like 28–36 cm of continuous insulation without losing internal space. Heat gains through walls and roof drop 3–4×.

As a result, CRIOJET paired with TSM turns on even less frequently. All thermal noise from the building envelope is cut off by TSM. The cooling system works based on logistics and door operations, not based on sun and wind. That’s what gives final consumption at 150,000–200,000 kWh/year instead of 2,250,000 kWh/year.

If we convert this into plain numbers, the picture for a 100,000 m³ facility in the USA looks like this. A classical warehouse lives at 2,250,000 kWh/year, paying $270,000/year at $0.12/kWh. The same warehouse after CRIOJET with TSM consumes 150,000–200,000 kWh, paying $18,000–24,000/year. Energy savings alone amount to roughly $250,000/year.

In Europe, at €0.30/kWh, the gap is even bigger: instead of €675,000/year, the CRIOJET warehouse pays €45,000–60,000/year. Pure electricity savings: ≈€615,000–630,000/year.

Beyond electricity, there are several effects that are easy to overlook but are felt by the owner every year:

1️⃣ Complete elimination of freon
No leaks, no refills, no penalties, no regulatory risk, no phase-out cycles.

2️⃣ Lower service costs
No compressors and no kilometers of piping — fewer failures and lower maintenance cost.

3️⃣ Reduced staffing
Fewer operating hours, fewer emergency calls, no need to service a classical refrigeration station around the clock.

4️⃣ The quietest but most painful issue — product losses
Conventional cold stores lose 1–4% of annual turnover due to improper humidity, overdrying, hot spots, and “dirty” air.
For a warehouse with $10–20 million turnover, this is hundreds of thousands of dollars written off yearly.
CRIOJET reduces these losses to 0–1% thanks to stable temperature, proper humidity, and constant ventilation.

If we sum everything, the real total benefit for the owner of a 100,000 m³ cold-storage facility looks like this:

📊 Summary Table

These numbers account not only for reducing energy consumption to 1/12–1/15 of the original level, but also for the elimination of freon, lower service and repair costs, smaller staff, dramatically reduced product losses. The removal of parasitic heat leakage through building structures.

A cold-storage warehouse that was once a heavy, energy-hungry consumer transforms into a next-generation cold terminal, paying for its modernization within 1–2 years and returning hundreds of thousands of dollars every year thereafter.


Also published on: LinkedIn — Michael Vischmidt