Post

The Gold We Flush Away

❌ Gold isn’t only in the ground — it is dissolved in effluent and flushed away. Gold is not just bullion: it is processor contacts, connectors, aerospace electronics, where nothing matches it for conductivity and corrosion…

❌ Gold isn’t only in the ground — it is dissolved in effluent and flushed away.

Gold is not just bullion: it is processor contacts, connectors, aerospace electronics, where nothing matches it for conductivity and corrosion resistance. Everywhere it is mined and processed, it keeps leaving in the water.

  • Cyanide leaching: gold goes into solution as the dicyanoaurate ion [Au(CN)₂]⁻; part never loads onto the carbon and leaves in recycle and tailings solutions. Cyanide tailings still hold **1–8 g/t**.
  • E-waste: the world produced **~72 million t** of electronic waste in 2026 and is heading for **82 million t by 2030**. Of the gold that ends up in e-waste, only **10–15%** is recovered; the other **85%** is lost. Recover **30%** of that and it comes to **~$8,800 million**.
  • Copper anode slime: a precious-metal concentrate where gold sits with the copper, needing its own leach.

❌ Baseline figures:

  • Gold: **~$129,000/kg** (July 2026). Forecast for end-2026 — **~$161,000/kg** ($5,000 an ounce).
  • Only **~10%** of secondary gold comes from electronics — **100–150 t/year**.
  • Cyanide tailings: **1–8 g/t** gold. Barren solutions give back **60–90%** of the cyanide and up to **99.98%** of the copper.

🟢 ARBOK’s technology:

vacuum separation:

  • deep vacuum (**~1 kPa**), ambient temperature, **~0.7 kWh/m³**
  • **100% water return** by volume
  • dicyanoaurate concentrates in the residual liquor → finished by a secondary pass
  • ballast salts leave by density, not fouling the sorbent
  • no high temperature or pressure, no mercury, no chemicals, membranes or consumables, no CO₂, no fumes, no noise.

For ore, rock and seawater there is a separate track — Arbok-Gold: gold binding without mercury or cyanide, viable from **1 g per 2.2 t** of rock.

🟢 Economics.

One module (**200 m³/day ≈ 70,000 m³/year**) at **0.5 mg/L Au** (design basis; barren solutions run 0.01–0.05 mg/L, loaded ones 1–5 mg/L — set by site assay):

  • **~35 kg gold/year → ~$4.5M/year**
  • + cyanide recovery **60–90%** — **~$0.07M/year**
  • + **70,000 m³** of water back into circulation — **$0.07M**
  • + cyanide detoxification removed — **~$0.11M/yr**

TOTAL per unit: net profit **~$4.5M/year** + cost savings **~$0.25M/year**. Altogether **~$4.75M/year**

🟢 At scale:

  • **85%** of the gold in e-waste is lost today — **~228 t of gold a year, ~$29 billion** at 2026 prices. This is the absence of an effective technology, and the water-phase recovery gap it creates.
  • Gold mining cycles cyanide through a closed loop that must be detoxified anyway: of **3,300 t** of world output **~80%** goes through cyanidation, and sodium cyanide use passed **1.2 million t/year** — **25–50 g** per gram of gold.

🟢 Where it changes everything:

  • Gold mines — recycle and tailings cyanide solutions
  • E-waste processors — board leaching solutions
  • Copper refineries — anode slime
  • Electronics and aerospace — contact feedstock

🟢 Bottom line: gold does not have to be mined again. It is there in cyanide solutions, board-leaching effluent, anode slime — all of which must be cleaned anyway. ARBOK knows how, and turns treatment into recovery.

@Arbok #Gold #Ewaste #ZWD